JAPUSOON Bike Rack Upright Bike Storage Stand Adjustable Bicycle Carrier,Front Wheel/Rear Wheel/Vertical Floor Parking Fits Nearly All Bikes

Price: $67.77 $58.77
Product prices and availability are accurate as of 2019-07-07 15:30:37 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $9.00 (13%)
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Features:

1.The Bike Stand suitable for front and back type insert.
2.The Indoor Mountain Bike can store the bike vertically or horizontally to suit your storage needs.
3.Powder coated steel construction for added strength.
4.Adjustable height and wheel frame size.
5.Maximum weight load 30 KG.
6.Space Saving,great for small spaces such as corners, dormitory, apartment,office, etc.
7.SIZE: length is 21.65", the width is 20.86", the height is 44.09"(After assembly).

How to Assemble
1.Install Rear Frame into Step-Bar with M6x30 screws in the Parts Pack-C.
2.Install Front Frame into Step-Bar with M6x30 screws in the Parts Pack-C.
3.Install Lower Arm to the side bracket on Front Frame with two M6x35 screws in the Parts Pack-B,then connect Upper Arm onto Lower Arm with M6x30 screw in the Parts Pack-A. The arm is position adjustable in 2 levels by changing the M6x30 screw insertion hole.

Required Tools
M5 Hex Wrench 1 (included in the kit)
10mm Spanner 1(Not supplied)

WHAT'S INCLUDED?
1 * Step-Bar
1 * Rear Frame
1 * Front Frame
1 * Lower Arm
1 * Upper Arm
1 * Front Wheel Hook(pre-assembled,1 Cup Nut on it)
2 * Tire Holder(pre-assembled)

Parts Pack
Screw M6x30 1
M6 Cup Nut 1
Screw M6x35 2
M6 Cup Nut 2
Screw M6x30 8

JAPUSOON PROMISE

We promise a warranty for our product, there is a ONE YEAR warranty for all the JAPUSOON product, please contact us for free,if you have any question about the product.

Product Features

HIGH QUALITY-Heat-treated high quality steel is adopted for this bicycle floor stand for added strength,4 corners covered with rubber cap to avoid scratch ground,Wear-resisting and reduce noise. MULTIFUNCTION-This bicycle storage is very convenient,not only suitable for front and back type insert,Also can store the bike vertically or horizontally to suit your storage needs.The bike stand lenght is 21.65", the width is 20.86", the height is 44.09"(After assembly). NEAR FITS ALL BIKES-The bike stand will fit almost All Bikes range from 20" - 24" Kids Bikes, 26" - 29" MOUNTAIN BIKES, 650C -700C ROAD BIKES, EXCEPT those bikes with the tires more than 2.4" in width. EASY ASSEMBLY-This bike stands don't need drilling to design , don't worry to damage wall,You can Assemble it according to the instructions in 10 minuetes. JAPUSOON GUARANTEE-We promise a warranty for our product, there is a ONE YEAR warranty for all the JAPUSOON product, please contact us for free,if you have any question about the product.

Write a Review